GSO IEC 61316:2014
IEC 61316:1999
Gulf Standard
Current Edition
·
Approved on
25 December 2014
Industrial cable reels
GSO IEC 61316:2014 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 61316:2014 Scope
This International Standard applies to cable reels provided with a non-detachable flexible
cable with a rated operating voltage not exceeding 690 V a.c./d.c. and 500 Hz with a rated
current not exceeding 63 A, primarily intended for industrial use, either indoors or outdoors,
for use with accessories complying with IEC 60309-1 or IEC 60309-2.
This standard applies to:
– portable cable reels equipped with one plug or appliance-inlet and at least one socketoutlet,
each complying with IEC 60309-1 or IEC 60309-2;
– fixed cable reels equipped with at least one socket-outlet complying with IEC 60309-1 or
IEC 60309-2;
– cable reels suitable for use at ambient temperature normally within the range of –25 °C
to +40 °C.
The use of this equipment on construction sites and for agricultural, commercial and domestic
appliances are not precluded.
This standard also applies to cable reels intended to be used in extra-low voltage
installations.
In locations where special conditions prevail, for example, on board ships, vehicles and the
like, or where explosions are liable to occur, additional requirements may be necessary.
NOTE – Additional requirements for cable reels for currents higher than 63 A are under consideration.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners

OS GSO 2530:2016
Omani Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners


OS GSO 34:2007
Omani Standard
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES


GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES

Recently Published from Electrical Sector
GSO IEC/IEEE 60214-2:2022
IEC/IEEE 60214-2:2019
Gulf Standard
Tap-changers - Part 2: Application guidelines



GSO IEC 60076-22-2:2022
IEC 60076-22-2:2019
Gulf Standard
Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators


GSO IEC 60076-7:2022
IEC 60076-7:2018
Gulf Standard
Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers


GSO IEC 62841-2-4:2022
IEC 62841-2-4:2014
Gulf Standard
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type

