GSO ISO 2063-1:2022

ISO 2063-1:2019
Gulf Standard   Current Edition · Approved on 12 May 2022

Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems

GSO ISO 2063-1:2022 Files

GSO ISO 2063-1:2022 Scope

This document specifies requirements for the protection of iron and steel surfaces against corrosion by applying thermal-sprayed metallic coatings of zinc, aluminium or their alloys.

In this document, requirements for the planning of the corrosion protection system and for the constructive design of the component to be protected are specified, where thermal spraying is intended to be the process for the deposition of the metallic corrosion protection.

Some field-related basic terms are defined and instructions for corrosion behaviour of the zinc and aluminium materials under different environment conditions are provided.

Characteristic properties of the coating, e.g. coating thickness, minimum adhesive strength and surface appearance, are specified and test procedures for thermal-sprayed corrosion protection coatings of zinc, aluminium or their alloys are determined.

This document is valid for applying thermal-sprayed zinc and aluminium protection coatings against corrosion in the temperature range between −50 °C to +200 °C, taking into consideration the service conditions of any sealants used. Heat-resistant protective coatings of aluminium are covered by ISO 17834 and are not in the scope of this document.

Other corrosion protection processes, e.g. hot-dip galvanizing (galvanic coating), sherardizing, electroplating or selection and deposition of organic coatings/paints are not in the scope of this document.

Requirements for the manufacturing of thermal-sprayed coatings are specified in ISO 2063-2.

Best Sellers From Oil and Gas Sector

GSO 1785:2013
 
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines API Classifications
OS GSO 1785:2013
 
Omani Standard
Lubricating Oils for Internal Combustion Engines API Classifications
OS GSO 672:2010
 
Omani Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 672:2010
 
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).

Recently Published from Oil and Gas Sector

GSO 548:2022
 
Gulf Standard
Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
GSO ASTM D341:2022
ASTM D341:20e1 
Gulf Standard
Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products
GSO ASTM D7603:2022
ASTM D7603:13 
Gulf Standard
Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
GSO 1206:2022
 
Gulf Standard
Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration