ISO 389-7:2019

International Standard   Current Edition · Approved on 05 November 2019

Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions

ISO 389-7:2019 Files

English 11 Pages
Current Edition
28.76 OMR

ISO 389-7:2019 Scope

This document specifies a reference threshold of hearing for the calibration of audiometric equipment used under the following conditions.

a) The sound field in the absence of the listener consists of either a free progressive plane wave (free field) or a diffuse sound field, as specified in ISO 8253‑2. In the case of a free field, the source of sound is directly in front of the listener (frontal incidence).

b) The sound signals are pure (sinusoidal) tones in the case of free-field conditions and one-third-octave bands of (white or pink) noise in the case of diffuse-field conditions.

c) The sound pressure level is measured in the absence of the listener at the position where the centre of the listener's head would be.

d) Listening is binaural.

NOTE 1 Correction values for the threshold of hearing under free-field listening conditions and selected angles of sound incidence (45° and 90°) deviating from frontal incidence are given in ISO 8253-2 for information.

NOTE 2 Other conditions are given in Reference [1].

The data are given in numerical form for the preferred frequencies in the one-third-octave series from 20 Hz to 16 000 Hz inclusive in accordance with ISO 266 and, in addition, for some intermediate audiometric frequencies up to 18 000 Hz.

The threshold data differ from the audiometric zero specified in ISO 389‑1, ISO 389‑2, ISO 389‑5 and ISO 389‑8, since the latter refer to monaural listening through earphones with sound pressure levels referred to specified couplers and ear simulators. Direct comparison between the data in the parts of ISO 389 mentioned above and in this document is therefore not appropriate.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-1:2013
 
Omani Standard
Expiration dates for food products -Part 1 : Mandatory expiration dates
GSO 150-1:2013
 
Gulf Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates

Recently Published

GSO 8:2024
 
Gulf Standard
TITLE IN ENGLISH
GSO ASTM D2532:2024
ASTM D2532:22 
Gulf Standard
TITLE IN ENGLISH
GSO 11212:2024
 
Gulf Standard
TITLE IN ENGLISH
GSO ISO 349:2024
ISO 349:2020 
Gulf Standard
Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases